Red RC » P On Road

November 16, 2009

Protoform R5-N 200mm body shell

Protoform have announced the immediate release of the all new R5-N 200mm gas sedan race body. Gas sedan bodies require numerous openings to be cut in the roof area to enable cooling and fuel filling and thus the bodies tend to become aerodynamically ‘dirty’ and inefficient. Protoform has designed a body to minimize the net drag losses caused by these openings. The unique side windows as well as the rear window contours enhance the efficiency of the linear airflow into and out of the body. Every feature, including the large rear wing, is within EFRA/ROAR/200mm Global Body Spec dimensions. The enlarged wing struts allow for the use of larger screws for quicker trackside adjustments and the center strut adds stability. Made to fit all the popular 200mm gas chassis this body is pulled in .030 lexan and is supplied with protective covering, decal sheet, window masks and wing hardware.

Click here for more images of the body

November 13, 2009

Team Titan Blitz ISF EP racing bodyshell

Team Titan have released the all new Blitz ISF EP racing bodyshell. Designed for rubber tire 190mm electric touring car racing it has been extensively testing and showed to give great handling and consistent lap times on both asphalt and carpet tracks. Sporting 2 height line in 115mm for IFMAR rules and 120mm For BRCA rules the attached wing also has 2 cut lines for adjusting the rear down force. Available in 2 different thicknesses, 0.8mm and 0.7mm, it is supplied clear with light decals and window mask.

Click here for more images of the body

November 12, 2009

Motonica 18T Clutch pinion gear

Italian company Motonica have announced the release of this new 18T clutch pinion. This precision part has been machined from Ergal 7075 and is an optional second gear for the 1/8th scale P81 chassis. This pinion is also compatible with the clutch bell on the P8C and P8F series.

Source: Motonica [motonica.com]

November 11, 2009

RB 1/8th Circuit body Wing set & Stiffeners

RB have introduced some new accessories for use with 1/8th scale on road body shells. This first is this new wing set, which is supplied with two different types which are pre cut and come with the necessary nylon mounting screws and nuts. Also for the body is a set of body stiffeners, that are made from high quality lexan and they two are delivered in two different versions and come supplied with body rivets.

Click here to see the body stiffeners

November 10, 2009

Serpent 733 20T aluminium pulley

New for the 733 200mm chassis, Serpent have released this aluminium 20T pulley. A replacement for the brake pulley on the gearbox shaft, this precision machined lightweight pulley has been hard anodised to reduce wear and also less dirt and dust will stick to the surface.

Source: Serpent [serpent.com]

November 10, 2009

Yeah Racing Formula Ten option parts

Aftermarket specialists Yeah Racing have introduced a number of new optional parts for the HPI Formula Ten. First up are these aluminium knuckle arms in orange, which are long lasting and durable and offer less flexing than the standard parts. Also focusing on the car’s steering the new aluminium steering arm is a more durable and stiff option than the standard part and looks great in orange. Completing the orange look is the new aluminium rear axle. For setting up your Formula Ten, Yeah Racing also now offer 1.4mm and 1.6mm T-bars, produced from high quality fibre-reinforced plastic, these T-bars are super strong and can cope easily with the shock from racing to improve the suspension system and obtain more grip.

Click here to see the other parts

November 6, 2009

Hudy Set-up system for 1/10 & 1/12 Pan cars

Hudy have released this premium-quality exclusive set-up system for 1/10 and 1/12 pan cars. To be used for super-precise measurement and setting of front camber, front toe, steering throw, and caster. Backlash-free, wobble-free mounting of the fully ball-bearing equipped set-up stands (6 high-precision ball-bearings) ultimately gives ultra-smooth, ultra-precise movement and operation. Set-up stands are CNC-machined, hard coated high-grade aluminium and all components feature precision engraving for instant, reliable readings. Includes handy set-up nuts for quick assembly/dis-assembly. Delivered in handy foam packing for comfortable and safe storage and transport.

Click here to see the setup system in action

November 5, 2009

Xray Lightweight Ventilated Brake disc

Xray have released this new lightweight, heat-treated and precision-ground ventilated brake disc for nitro cars. The CNC-machined brake disc is lightweight and balanced for vibration-free operation, while strategically-placed holes allow for ultra-cool operation without overheating, ensuring consistent and efficient braking to minimize brake pad wear and disc glazing.

Source: Xray [teamxray.com]