Red RC » P On Road

July 16, 2008

Capricorn “V” Velocity Carbon tyres

Our site sponsors Capricorn RC have announced the release of their “V” Velocity Carbon tyres. Available pre mounted on 1/10th scale Velocity Carbon wheels, the tyre has been cut from a single foam sheet and not from 2 sheets and glued together like most other tyres on the market. This gives shore uniformity, better performance, constant and uniform wear as well as more selective and accurate shore matching. Available in both 26mm and 30mm they come in 35, 37, 40, 42 and 45 shores.

Source: Capricorn RC [capricornrc.com]

July 16, 2008

Protoform Mulsanne LMP 200mm body

With the new 200mm pan car class gaining popularity with every passing month Protoform is introducing a new LeMans prototype body style, the Mulsanne LMP. This body incorporates the svelte look and the flowing lines of the many “factory works prototypes” that raced in the 24hr classic in the late 90’s. It features an add-on rear spoiler extension with a gurney flap as well as a high mounted wing. A pair of injection molded wing struts are included as well. The wing profile and wing strut lengths can be trimmed to optimize handling for both carpet and paved track surfaces and it’s designed to fit all of the latest in 200mm pan car chassis. It also comes complete with wing and spoiler hardware, window masks, and protective film. The decal sheets feature two different headlamp styles.

Click here to see more images… content

July 15, 2008

Team Orion CRF 21 Circuit engine

Team Orion have announced that the long awaited CRF 21 on road engine will begin shipping worldwide next week. 1/8th scale on-road racers demand the highest performance and consistency from their engines, and Team Orion is ready to deliver with this new engine, combining elements of the CRF technology with established standards to produce a strong engine that provides a stunning balance of consistency and power.

Click here to see more images… content

July 14, 2008

RB CJ004 LE .21 Circuit engine

RB Products have announced the release of the very limited edition 3.5cc RB CJ004, a sport engine for on road racers. Offering racers the opportunity to power their on road cars without spending a large amount of money, this 7 port engine features the usual ABC construction of the RB Line and is supplied with a 9mm composite carburettor.

Source: RB Products [rbproducts.com]

July 11, 2008

Hudy TC & Buggy Car stands

Seen at February’s Toy fair, Hudy have now released this range of stylish car stands for both 1/10 electric and nitro touring cars as well as a version for 1/8th scale off road buggies and truggies. The surface on both stands is black powder coated for maximum long life and to withstand abusive working conditions and has a very small footprint making it very handy to pack for travel. Strategically-placed holes provide a great place for temporarily storing standard or big-bore shocks during rebuilds, and laser-engraved markings (FL, FR, RL, RR) ensure you keep track of the proper shocks. Four rubber feet mean that the stand will stay firmly in place and not move while working on the car and 2 super-soft foam strips bonded to the top surface make sure that the car will sit softly and will not move while you’re working on it. Laser-engraved Hudy logos adorn the stylish black powder coated surface.

Click here for more pictures… content

July 9, 2008

Alex Racing Design M-6 Speed

Alex Racing Design have released the follow up to your Japanese National winning LX-250 body shell, the M-6 Speed. Tested around the Yatabe Arena, it was an average of 0.3 seconds a lap quicker than the previous shell. The design allows for good straight line speed, good downforce and a low centre of gravity, while the aerodynamic cockpit allows air to flow freely to the included rear wing. Also comes supplied with light and grill decals and window masks.

Click here to see more angles… content

July 8, 2008

Serpent 960 Radio plate support weight

Also new for the Serpent 960 is this aluminium radio plate support with brass weight. Similar in structure to the previous aluminium bracket, this version has been modified to accept the brass weight and will come as standard in future 960-08 kits. The accompanying brass weight adds 50 grams to very centre of the car and is mounted as low as possible in this area so as not to adversely affect the centre of gravity. Similar in concept to the previously released brass battery holder, this system gives a more neutral handling characteristic than that of the battery holder yet has the same benefits.

Click more to see the brass weight mounted in the bracket… content

July 8, 2008

Serpent 960 Shock tower RR V3

Serpent have announced the release of this new shock tower for the rear of the Serpent 960. Made from 3.5mm thick carbon fibre, the new shock tower features a 2nd, higher mounting hole for the centring pin. This hole allows for the rear body mount to be set at its highest setting, while still being able to be centred. Some new low body shells work best when they are raised at the rear and this new shock tower facilitates that. This part will come as standard in future 960-08 kits.

Source: Serpent [serpent.com]