February 18, 2016

Novak Hammer sensored 1/10th scale controller

Novak Hammer sensored 1/10th scale controller

Available soon from Novak is the intermediate-level Hammer 1/10th scale brushless speed controller. The sensored ESC is good for the use with 2S to 3S LiPo battery packs and down to 8.5T motors, making it ideal for a range of on-road and off-road applications. The controller is factory-defaulted to LiPo mode with reverse turned on and drivers can customise the firmware to suit their driving style, including throttle curve, brake power and many other parameters. The firmware also includes thermal overload protection, low-voltage protection, and motor lock-up protection for added reliability. Additionally, on-board diagnostics are standard in the firmware including a motor sensor checking test, error sensing, and on-board temperature diagnostics. Designed with a silicone gasket sealed case, the Hammer is protected from the elements such as water, dirt, and other debris and it comes pre-wired from the factory with gold-plated bullet connectors for easy installation.

Source: Novak [teamnovak.com]


February 16, 2016

JConcepts B5 series aluminium shock parts

JConcepts B5 series aluminium shock parts

JConcepts have introduced new aluminium shock parts for Team Associated’s fifth generation 1/10th scale off-road vehicles. First up are the Fin series shock caps with angular bleed hole for correct building procedure and maintenance. The precision machined caps features weight reducing holes positioned about the centre to reduce weight and add to the popular styling. A knurled portion makes for increased grip when fastening or undoing the cap.

Continue reading here


February 15, 2016

Dustin Evans triples at the Rumble in the Rockies

Dustin Evans triples at the Rumble in the Rockies

The 21st annual Rumble in the Rockies race was held this past weekend at MHOR RC Raceway in Aurora, Colorado. The prestigious event attracted both local talent and internationally experienced racers such as Dustin Evans, Kody Numedahl and Travis Amezcua to race in the usual mix of Modified and Stock categories. In the premier 2WD Modified Buggy class Dustin Evans would grab the top qualifier spot from Kody Numedahl and Frank Root. 4WD Modified Buggy again had Dustin Evans coming out fastest in the qualifiers, this time in front of Travis Amezcua and Frank Root. With a TQ in Modified Truck Dustin Evans would round out his domination while Zeke Ballinger and Matt Chambers had to settle for second and third on the grid. Finally in Modified Short Course it was Kody Numedahl who set the pace from Brandon Steele and Lars Johnson.

Continue reading here


February 12, 2016

Avid Triad B5M/TLR22 direct drive set

Avid Triad B5M/TLR22 direct drive set

Avid have introduced the Triad direct drive set that allows stock racers to remove the entire clutch assembly for conditions where the driver feels having less rotating mass and zero slip except from the differential is beneficial. The unit is of a very lightweight design which was accomplished by removing all the plates and pads as well as the steel spring with a minimalist design done in aluminium. The DD plate is hard anodised for strength and the DD post is gutted for weight removal for a grand total of 0.8 gram. For B5M owners, there is also an included M4 aluminium flanged locknut to remove even more weight. The direct drive set is a direct fitment for Team Associated 5th generation vehicles such as the B5, T5 and SC5 and it is also usable on TLR22 and Kyosho RB6 kits with the latter requiring the Avid Triad Kyosho aluminium top shaft. The set will hit the stores soon.

View more images here


February 9, 2016

RJ Hart doubles at RC Super Bowl race

RJ Hart doubles at RC Super Bowl race

The recent RC Super Bowl saw RJ Hart walking away with a double win in 1/8th E-Buggy and 4×4 Short Course classes. In the E-Buggy category RJ took the TQ after winning all four qualifying rounds and in the final he cruised to the win in front of Casey Maul and Cody Romanczuk in second and third respectively. In 4×4 Short Course RJ would win two of the four qualifiers but he lost the TQ in the tie-breaker. The main was a different story then with the lead swapping constantly but at the end RJ hold the upper hand over Ken Zimmermann who grabbed the runner-up spot. In third Randy Drapinski completed the top 3 result.

View the 4×4 SC podium here


February 8, 2016

Kosciuszek & Richards win at JConcepts Winter INS

Kosciuszek & Richards win at JConcepts Winter INS

Following some intense qualifying rounds at the 2016 JConcepts Winter Indoor National Series on Saturday, Sunday’s mains took that intensity and turned it up even further. From 9 am, the lower mains were ran to decide two bumps, giving racers a last chance effort to make the coveted A-mains. Taking the top 2 drivers in the lower mains, until the B-main which only took one single winner into the A making it a 10 + 1 grid. The JConcepts INS runs a slightly different format than the typical race. Triple A-mains are ran to decide the winner of the 2WD and 4WD Modified classes with the rest running one single 8 minute main that would test drivers’ limits.

Continue reading the report here


February 8, 2016

Exotek Exo22SCT aluminium & carbon chassis kit

Exotek Exo22SCT aluminium & carbon chassis kit

Exotek have introduced the Exo22SCT aluminium and carbon fibre conversion kit for the TLR22SCT and SCT 2.0. With its simple and efficient layout, the chassis design offers improved rearward weight positioning of the battery and electronics to better suit a variety of track conditions while also allowing for the faster and easier to drive side ways mounted shorty battery positioning. The chassis set includes the machined and black anodised 2.5mm 7075 aluminium main chassis, 5mm carbon side rails and a redesigned battery mount that also acts as the top deck. The increased chassis footprint allows for more electronic layout options and proper weight balancing while maintaining a low centre of gravity. The conversion kit is available soon and it requires a TLR22SCT or SCT 2.0 truck in mid motor configuration.

Continue reading here


February 7, 2016

2016 JConcepts Winter INS – Qualifying results

2016 JConcepts Winter INS – Qualifying results

After 3 intensive rounds of qualifying at the JConcepts Winter INS at SmacTrac, the racing couldn’t get any closer showcasing the skills and talent of many of the locals as well as from travelers from afar. 2WD Modified was a battle between Team Associated teammates with Alex K taking round 1 and Daimon Borkowicz setting the fastest time in round 2. The final round of qualifying would ultimately decide the starting order and it was Alex K taking the win in round 3 giving him the top spot. Borkowicz wasn’t able to better his time in round 3 and will start in 2nd. JP Richards, who’s been very close to winning rounds all weekend, is going to start the triple A-mains from the 3 spot.

Continue reading the report here


Tonisport
Mibosport
LC Racing
VP Racing
T-Works