Red RC » P Off Road

February 12, 2014

Waters & Cragg win at Schumacher Masters Rd5

This past weekend saw a great entry of 13 heats of drivers enter the Schumacher Masters round five of this hugely competitive championship. During qualifying there were several fast drivers, however after all of the qualifying was over it was Neil Cragg who would set off from pole position in both classes. The finals saw some brilliant close racing action in both classes, all the way through the field and some superb overtaking. In the 2WD class Schumacher’s Nathan Waters came in 1st, followed by Craig Collinson (Team Durango) and Neil Cragg (Team Associated).

Click here to continue reading

February 12, 2014

Hudy aluminium rear wing shims

The Hudy aluminium rear wing shims are designed to replace standard plastic shims with a cooler looking and more durable alternative. Currently available in silver and orange colour the parts are of a heavily machined design that reduces weight and adds a certain bling factor. The shims fit many 1/8th and 1/10th vehicles as well as off-road and on-road bodies and wings.

Source: Hudy [hudy.net]

February 12, 2014

Atomik Red 550 BL motor & 120A ESC

Atomik introduce the new Red 550 sensored brushless motor and 120A sensored speed controller. Starting with the motor, the power unit is especially designed for the use with 1/10th 4WD short course trucks, it is available as 4.5T and 7.5T variant and compatible with Traxxas’ VXL-3s speed controller, making it a good update for brushless TRX models. As for the controller, the 120A rated unit comes pre-wired with 12AWG wire and EC3 connector, it includes a 200mm sensor wire and works both with sensored and sensorless motors. The motors and controller are available separately or as combo including the 4.5T or 7.5T motor.

Click here to view the controller

February 11, 2014

Shortcourse Showdown Nationwide Tour Rd1 – Report

The 2014 Shortcourse Showdown Nationwide Tour kicked off in Tacoma, Washington last weekend, hosted by Tacoma RC Raceway, owned by long time racer Scott Brown. Saturday started early with open practice at 7am. After a quick drivers meeting, Scotty Ernst got things going with the first qualifier on the track at 10am. The 2014 season has a few added classes including 2WD and 4WDBuggy, along with Stadium Truck. After 3 rounds of qualifying Micheal Schoetler TQ’ed in Mod 2WD and 4WD Buggy, Chris Gould lead in 4WD SCT and Dave Duncan was on top in stock 2WD Buggy and Short Course Buggy.

Click here to continue reading

February 11, 2014

Team Associated Factory Team tools & B5 options

Team Associated introduce two new Factory Team tools as well as optional heavy-duty ballstuds for the B5 and B5M buggy. Starting with the tools, available soon are a T-handle 7mm nut driver and a 5.5mm short nut driver. The 7mm wrench is designed for wheel nuts and other 7mm applications while the 5.5mm driver is ideally used for shock nuts and the like. Both tools come hard-anodized and with laser-etched size markings.

Click here to continue reading

February 11, 2014

Miguel Matias doubles at Portuguese off-road nats Rd1

Miguel Matias doubles at Portuguese off-nats Rd1

Last weekend the first ever Portuguese 1/10 4WD and 2WD off-road nationals took place at the ACRP indoor track. The meeting saw 19 entries in 2WD and 27 in the 4WD class. The carpet track had a fast and flowing layout, with a few tight corners, well designed jumps and plenty of entertainment. In 2WD Buggy Miguel Matias totally dominated qualifying, TQ’ing the first 3 rounds. The 2WD finals then were quite eventful and Miguel Matias faced a good challenge from Ricardo Monteiro in the first final, but in the end he won by 2 seconds over Ricardo. In the second leg Matias took the lead again and checked out, handing him an unchallenged win and the overall victory.

Click here to continue reading

February 11, 2014

Revolution Design Ultra Flyheight Tool

Revolution Design Racing Products introduce the Ultra Flyheight Tool for 1/8th off-road vehicles. Made from aircraft-quality 7075-T6 aluminium the tool incorporates a flywheel tool, a clutch gap gauge and a ride height gauge. The shape of the tool allows to securely fasten 3-pin and 4-pin flywheels while fastening the clutch nut and therefore it is the ideal combination with the RDRP Ultra Flywheel Puller. Once the flywheel and the clutch bell are fitted the axial play can be measured and adjusted using the clutch gap gauge. A stepped slot measures the axial clutch bell play between 0.3mm and 0.9mm in 0.1mm increments. On top of that helps to measure the chassis ride height in a range of 20mm up to 40mm by simply placing the tool underneath the chassis plate. 1mm increments make for a precise adjustment while the black anodising and white laser-etched markings give the tool a factory look.

Source: RDRP [revolution-rc.com]

February 11, 2014

Xray XB4 +2 rear lower suspension mounts

Xray introduce the +2 rear lower suspension mounts for the XB4 buggy. Recommended for the use on carpet and other high traction surfaces, the parts make for improved rotation in and better “drive” through corners. Available as separate front and rear mount, the parts are made from 7075-T6 aluminium, they come black anodised and make use of Xray’s composite material inserts to further fine-tune the suspension geometry. The parts fit both the XB4 4WD and 2WD buggy.

Source: Xray [teamxray.com]