Red RC » P Off Road

June 4, 2013

Yaiba Racing TLR 22 alloy C-hubs & steering rail

Yaiba Racing soon release two new option parts for the Team Losi Racing 22 platform in the form of front aluminium C-hubs and an aluminium steering rail. The C-hubs improve the rigidity and durability of the front end and come with 5° of build-in caster. Included in the set are 2mm shims to allow for easy wheelbase changes. Also new is an aluminium steering rail that is designed to replace the kit’s plastic part. The rail features updated inner steering link positions to improve the Ackermann geometry over the standard part. Both the C-hubs and the steering link are available very soon.

Click here to view the steering rail

June 4, 2013

Martin Bayer doubles at Astra Nitro Cross

The Astra Nitro Cross 2013 was held last weekend at Auto Bayer arena in Slavkov u Brna and Martin Bayer gives a short rundown on how the meeting went. The event is the largest in the Czech Republic with many drivers from Europe attending the annual event. The track again was pretty challenging with banked turns, technical corners and difficult jumps. Rain on Friday meant the race started a little later than planned and practice was limited to rounds with a following qualification round. The first practice round was run on a wet track but that later on dried up. Xray’s Martin Bayer was able to TQ both openings rounds of the nitro buggy and electric buggy class. On Saturday four more rounds of qualification were run and again both classed been dominated by Martin. Five minutes before the third run a heavy rain interrupted the racing making it necessary to cancel the round.

Click here to continue reading

June 4, 2013

Martin Soerlie wins at Norwegian Cup Series Rd3

The third round of the Norwegian Cup off-road series took place on the Innherred RC’s track in Levanger, Norway. The full astroturf track had a very similar layout to earlier years, only one turn has been altered just a bit, so all drivers needed little time getting familiar with the rhythm. After the qualification rounds Joakim Nicolaisen (Associated) took TQ in the 2WD class followed by 2011 Norwegian Champion, Martin Soerlie (TLR) who wasted a very good TQ run on the last corner in the last heat and had to settle for second, meanwhile local hero Roy Gjemble lined up in third position.

Click here to continue reading

June 4, 2013

Vision Racing SCTE 2.0 carbon fibre options

Vision Racing introduce three new option parts for TLR’s Ten-SCTE 2.0 4WD short course truck in the form of a centre diff brace and two different length steering drag links. All parts are cut from 2.5mm quasi-isotropic carbon fibre and while the diff brace makes for a stiffer and more rigid centre of the chassis the steering links are used to adjust the Ackermann angle of the front tyres in order to fine-tune steering characteristics.

Click here to view the other new parts

June 4, 2013

Avid B44.2 aluminium centre cap

Avid B44.2 aluminium center cap

Avid’s new B44.2 aluminium centre cap is a fresh take on the design which keeps your chassis secure and makes the car easier to work on. The design eliminates 4 screws for the original cap and instead directly links the front and rear upper decks with taper mounts that key into the upper decks. The added benefit of this design is that maintenance is simplified, when you only remove 4 screws and the entire upper deck assembly is loose for easy slipper clutch removal.

View more images of the centre cap here

June 3, 2013

Tekno RC NB48 1/8th nitro buggy

Tekno RC have introduced the NB48, a completely new 1/8th nitro buggy built on their EB48 and SCT410 platform. The chassis has ideal weight distribution side-to-side due to creating an all new mid-offset rear bulkhead and ring gear which moves the engine closer to the centre without overloading the right side. It also minimizes drive angles and wear on the center dog bones so the drivetrain is as free as can be without sacrificing chassis layout and weight balance on the very narrow 4mm 7075 CNC hard anodized aluminum chassis. The engine can be mounted in two positions, a front position and an 18mm offset rear position. Under most conditions the motor forward produces the fastest cornering and subsequent lap times while in very bumpy or very loose conditions testing shows the rear engine position can be easier to drive.

View more details and images here

June 3, 2013

Numendahl double at JBRL Rd3

In this tenth year of running, the Jimmy Babcock Racing League continues to draw huge crowds for the one-day events. With over 260 entries invading the Pegasus Hobbies facility, there was sure to be enough action for everyone. With the first race going off at 8:30am and the last race finishing after 11:30pm, there was non-stop action around the outdoor, clay track. Team Associated descended upon the event to both support the series regulars and to compete for race wins. In the most popular class, 2WD Modified, Team Associated/Reedy/LRP’s Kody Numedahl and his JConcepts equipped B4.2 Factory Team were the star of the show. Setting the early TQ and walking away from the field in the main, Kody led a 10-car field to victory.

Continue reading the report here

June 3, 2013

JConcepts TLR22 & 22T / 22SCT front shock towers

JConcepts have released new 4mm carbon fibre front shock towers for the TLR 22 and 22T / 22SCT. The design team has pin-pointed the exact geometry locations of the front shock tower and designed a durable and lightweight option part that is a direct bolt-on for the front-end of the popular TLR vehicles. The shock tower is 4mm in thickness and features all the stock mounting geometry in a more compact package. Reinforcement ribs have been added where needed for additional strength and mounting hardware has been included for a secure hassle free attachment. Additionally, the replacement front truck tower includes a 2.5mm locknut for body mount attachment.

View the 22 buggy shock tower here