Red RC » P On Road

June 8, 2011

Adrian Bernsten dominates Rd2 of Swedish Nats

The 2nd round of the Swedish Nationals was host by MHF Skarpnäck on ”Flatenbanen” in Stockholm, the capital of Sweden and Norwegian racer Adrian Bernsten sent us this report. The race was held during the weekend of 4th – 5th June. Classes included were 1:8th scale and 1:10th 200m. I competed in both classes using Xray cars and Capricorn engines. This track is the biggest in Scandinavia and we had approximately 18seconds laps with the 8th scale cars, and 20seconds laps with the 10th scale. This track really showed the difference between good and bad engines. Even though top speed was important, the track was also pretty technical so you also needed good bottom power as well. With my Capricorn LAB-E01 SQ engine in my NT1 and the Capricorn LAB21-BC engine in my RX8 I didn’t have any problems with the power at all, as my engines was of the best during the whole race in both classes.

Continue reading the report here

June 8, 2011

CSO LAB-C801 clutch bell

CSO products have released this new clutch bell for the Capricorn 1/8 LAB-C801 on road car. This high quality clutch bell has been made form hard coated 7075 T6 aluminium, which at only 3.7g is lighter than the original kit version.

Source: CSO [cso.com.hk]

June 8, 2011

Tim Wood wins BRCA 1/8th Rd3

Mendip hosted round 3 of the 2011 BRCA 1/8th scale championship over last weekend, with the prospect of a very competitive race and good weather which should provide high grip levels. Saturday as expected was very warm with an ambient temperature of around 26 degree C with a very high cross wind but this did not seem to affect the cars on track. The usual top drivers were present apart from Neil Diver who had work commitments but was to arrive on Sunday. The grip levels initially were low which allowed all drivers to setup their engines prior to fine tuning the chassis setup.

Continue reading the report here

June 8, 2011

Huge RC FF11 FF03 conversion

Over 6 months in development by former World Champion Surikarn Chaidajsuriya, Huge RC have release the FF11 FF03 conversion. The prototype was used to win this year’s FWD class at the TITC in Thailand, with the design aimed at making the car more rigid, tunable and reliable on the track. The kit features a narrow 2.5mm carbon fibre chassis allowing it to rip through corners as well as a 2mm carbon fibre top deck held in place by 8 screws which can be removed to adjust flex. A new battery mounting system, utilizing an o-ring and aluminium mounts keeps it in place while tape slots allow it to be secured further. Other features include 3mm carbon fibre front and rear shock towers, one piece aluminium front motor mount and blue anodised aluminium lower bulkheads, which are symmetrical in design allowing the bulkhead to be interchangeable front and rear.

View more images of the conversion here

June 8, 2011

Azri Amri wins round 2 of MNC 2011

The second round of the Malaysian National Championship (MNC) was held recently at the Kota Raja track in Klang, where FEMCA 2005 was held. The track was just lightly refurbished with a thin layer of tarmac being laid, with the island being rebuilt and new paint on the track, it is set to be a very exciting race. This round is again a tough fight for all racers, the track is a mixture of semi-technical and high speed, with a straight of about 150ft, it calls for good balance of top speed as well as torque out of the corners in the infield.

Continue reading the report here

June 7, 2011

Roche TRF417 heavy duty spool cups

Roche have introduced their new heavy duty spool cups for the TRF417 & 416. The spool cups are made from spring steel for more durability, yet have been strategically machined to reduce weight and rotating mass. The cups mount directly to the original Tamiya aluminum front shaft.

Source: Roche RC [roche.hk]

June 7, 2011

Oscar Cabezas dominates Rd2 in Spain

The second round for Spanish 1/8th Onroad took place last weekend at Almussafes, Valencia. Oscar Cabezas with his Vox engine powered Motonica, fueled by Merlin Pro-Racing fuel, took all 4 qualifiers giving no option to his rivals. The main final saw Óscar Cabezas maintain his first position at the start followed closely by Nacho López who had a different fuel strategy. However right after the tire stop, Nacho had a mechanical trouble and could not fight for the victory. Oscar would take the win by 5 laps ahead of Victor González in 2nd and Sergio Montesinos 3rd.

Source: Merlin [merlinfuel.com]

June 7, 2011

Haikal & Mizan win Malaysian Nats Rd2

The 2nd round of Malaysia National Championship series was hosted by RCAC at the Titiwangsa R/C track in the heart of Kuala Lumpur. As the track was a little bit wet in the morning the conditions were not easy for the contenders. The races started with the qualifying of the 1/8th scale category. At his 1/8th scale debut race Haikal immediately piloted his Shepherd V8 ‘11 to the provisional TQ spot in the first round of qualifying. The combo of his out of the box Shepherd car with default factory settings and Shepherd tires work flawlessly on the damp but drying track. Despite the best effort by the other drivers during the 2nd and 3rd rounds of qualifying the he kept his TQ position for the 45 minute final.

Continue reading the report here