Red RC

December 5, 2016

Avid 12mm V2 Team Associated shock pistons

Made for Team Associated’s V2 1/10th scale shock absorbers are Avid’s 12mm V2 shock pistons. The machined and highly precise V2 pistons offer a conventional setup with square 90 degree edges and a tight fitting design for reduced blow-by, resulting in improved damping efficiency and accuracy. The pistons fit the screw-type V2 12mm shocks and they are available as 2×1.6mm, 2×1.7mm, 3×1.4mm and also a blank version in sets of two pieces.

Source: Avid [avidrc.com]

December 5, 2016

Team C GT aluminium front arm mount

Coming from Team C and made for their line of 1/8th GT cars is an aluminium front arm mount. The part is machined from high-quality material for exceptional durability and precision and it comes with an orange anodised surface for wear and visual impact.

Source: Team C Racing [teamcracing.com]

December 5, 2016

Ryan Cavalieri dominates 2016 Top Gun Shootout

SDRC Raceway of San Diego, California held the 2016 Top Gun Shootout this past weekend. After qualifying was complete, Ryan Cavalieri would take the TQ in 2WD Modified Buggy and Modified Truck while 4WD Modified Buggy was lead by his teammate Rivkin Spencer Rivkin. Cavalieri went onto win A-mains one and two of 2WD Modified Buggy to take home his first title of the weekend.

Continue reading here

December 3, 2016

Coelho cruises to A1 win at ETS

sat_brunoa1-1-770x462

Bruno Coelho cruised to an easy victory in the opening A-Main at Round 1 of the Euro Touring Series in the Czech Republic. Having TQ’d earlier in the day in Hrotovice, the Xray driver made light work of his opposition to win by 2.4-seconds from Ronald Volker who in turn had a 3.5-second advantage over 3rd. It was the battle for 3rd that would provide the entertainment as a train of cars backed up behind P3 starter Viljami Kutvonen until a slight error by the Finn let Marc Rheinard through to complete the Top 3. Managing to hold off the challenge of Xray’s Alexander Hagberg, Kutvonen would hang onto fourth.

Continue reading this report here or view our full event coverage here.

December 3, 2016

Coelho to start ETS defence from pole position

sat_tqbruno-770x462

Bruno Coelho will start the defence of his Euro Touring Series title from pole position, the Xray driver becoming Top Qualifier at the season opener in Czech after he made it three out of three in the penultimate qualifier. His 5th ETS career TQ, Coelho would again set the pace ahead of Ronald Volker in Q3 even surviving flipping his car. With Top 3 pace setter from Q1 & 2 Viljami Kutvonen crashing out in third qualifier when he ran a wide line on the main straight and then understeered into the boards at the sweeper breaking his Awesomatix, this would allow last year’s Top Qualifier Marc Rheinard to post his best round with a P3 ahead of Alexander Hagberg and Elliott Harper.

Continue reading this report here or view our full event coverage here.

December 3, 2016

Coelho again in Q2 at Czech ETS

sat_bruno-1-770x462

Having opened Season #10 of the Yokomo Euro Touring Series with a TQ run in the Czech Republic last night, Bruno Coelho got Day 2’s proceedings underway with another in Q2. The Xray driver was again the class of the field, his rivals failing to get on terms with the reigning Champion who again topped the times comfortably by ETS standards. Over 2-seconds off Coelho, Ronald Volker was again his closest rival however the German only just managed to finish ahead of Viljami Kutvonen, the Q2 Top 3 a repeat of the opening qualifier. After a number of mistakes left Akio Sobue P10 in the first round, the number 2 seeded driver kept it clean in Q2 to post the fourth fastest time ahead of last year’s event winner Marc Rheinard with top seed Alexander Hagberg completing the Top 6.

Continue reading this report here or view our full event coverage here.

December 3, 2016

T-Works Project 4X 4.5mm hard aluminium pivot balls

Made for Serpent’s Project 4X touring car are T-Works’s new hard-coated 4.5mm aluminium pivot balls. Machined from aircraft-grade 7075-T6 material and coming with a hard-coated surface the ball ends offer a low weight and exceptional durability. They are equipped with a 2mm hex head and come in sets of four or 16 pieces.

Source: T-Works [rc-tworks.com]

December 3, 2016

Murfdogg Demon X spring car kit

Murfdogg have released their new Demon X spring car kit. Based on the company’s successful Demon gearbox platform, the new kit represents the next step in high-bite foam tyre sprint car racing. The car features a 2.5mm carbon fibre, engineered flex, dedicated direct-drive chassis that makes for optimised performance in high-traction wet clay, asphalt, and carpet track conditions. Murfdogg’s most complete sprint car offering to date, the Demon X includes a wide cage with newly designed machined side panels, hood, tail tank, lightweight 6×6″ wing and a “pretzel” front bumper system. The kit is available now.

View the features and more images here