Red RC

February 25, 2016

Colin Herzig sweeps Expert classes at 2016 DNC

This past weekend, the 2016 Dirt Nitro Challenge was once again held at The Fear Farm in Goodyear, Arizona. Joey and The Dirt track crew did an amazing job on the track build for this years event and it was a big hit with all the drivers. Kenny Brosh and Jimmy Babcock did another great job keeping the race program moving silky smooth all weekend long and with the total 1/8th race entries being limited to 600 this year, the event went off without a hitch and was very well received by all the racers. On Saturday night, the 30-Minute Expert Nitro Truggy A-Main event would be run. Kyosho America’s Colin Herzig would start 3rd on the grid and as the dust settled after the 30-Minute A-main, it was Herzig taking the impressive win by just under 1 second ahead of TQ holder CJ Jelin (HB). Victor Guerrero (HB) would go onto finish 3rd on the podium.

Continue reading here

February 25, 2016

Xray 50g stainless steel battery weight

Coming from Xray is a 50g stainless steel battery weight for the XB2 and other 2WD buggies. The plate allows to add weight to the lowest point of the chassis, making for an improved and more forgiving handling especially in high-grip and bumpy conditions. The plate comes laser-etched for easy identification, it is placed between the chassis and the battery pack and usable in all vehicles whose battery compartments allow the use side-by-side saddle packs.

Source: Xray [teamxray.com]

February 25, 2016

Ales Bayer doubles at Benek Cup

The Polish Benek Cup in Poland, considered to be one of the most popular races in the country, was recently held in the city of Lodz. Ales Bayer would be in control of things in the 2WD and 4WD Buggy classes as he not only TQ’d both categories but he also took the overall wins. In 4WD Szymon Luczak and Siwy Luczak would come in second and third respectively while the 2WD podium was completed by Wojciech Rzepecki and Sebastian Migal.

Continue reading here

February 25, 2016

HRC Racing 68112DL & 68113DBL low-profile servos

HRC Distribution have introduced two new low profile servos. The HRC Racing 68112DL (0.09s/12.0kg-cm) and the 68113DBL (0.07s/13.0kg-cm) both utilise nylon fibre and aluminium cases, they feature double ball bearings and a sturdy metal gear drivetrains, with the 68113DBL also coming with a powerful brushless motor, making for even swifter transit times and increased torque. The servos are usable with 4.8V to 6.0V input and they use standard 25T spline servo arms.

View the other new servo here

February 25, 2016

Bezerk RC YZ4 graphite upper decks & battery hooks

Australian company Bezerk RC have introduced two new optional carbon fibre top decks and a battery hook set for the Yokomo YZ4 buggy. First up are the two optional top decks. Both are made from 2.0mm carbon fibre and for low to medium grip conditions, the Supaflex version is made to allow more flex, resulting in reduced and more consistent lap times. The split design also allows some level of adjustment, like an on-road top deck, more or less screws can be fitted to fine tune the amount of flex.

Continue reading here

February 25, 2016

Spec-R T4’16 2.25mm carbon fibre chassis plate

Spec-R T4'16 2.25mm carbon fibre chassis plate

Coming from Spec-R and made for the Xray T4’16 touring car is a 2.25mm carbon fibre chassis plate. Cut from high-quality carbon fibre the chassis is of a fully symmetrical design with the milled motor pocket also apparent in the battery compartment to make for equal left-to-right flex characteristics. The chassis is a direct replacement for the stock part and available soon.

Source: Spec-R [spec-r.com]

February 25, 2016

Maclan Racing MRR competition brushless motors

Maclan Racing have introduced their all-new MRR 540-size sensored competition brushless motors. They are built using pure copper wire and feature a balanced sintered rotor, adjustable timing, a lightweight, vented CNC-machined 6061 all-aluminium can and precision ball bearings. The spec class MRR motor is designed to the maximum tolerance of the rules and the short stack design will produce a lower resistance allowing the highest performance possible. The motors utilise heavy-duty concave-shape soldering taps for easy wiring and they are available in 3.5T to 25.5T variants from March.

View the features and another image here

February 24, 2016

JConcepts Hybrid 1/8th off-road wing

Seen for the first time at last week’s Dirt Nitro Challenge, JConcepts have now officially introduced the all-new Hybrid 1/8th off-road wing. The pre-trimmed polycarbonate wing formed in heavy-duty material has a hard chamfered leading edge to the side-dams while angular sections blend into the high-performance shape giving a location for that initial step and transition to the wing’s gurney position. At the rear of the wing rest 7 individual ribs which support the wings upper section as it transitions to the gurney and the wing set features injection moulded components which form the Hybrid combination.

Continue reading here