From Roche comes this new centre pivot mount spacer set for the Rapide P12 Evo2. Made from 0.5mm stainless steel and 1.0mm aluminium. Easily insert between aluminium lower pod and centre pivot ball mount for roll centre adjustments.
View the different spacers here
Dash RC have announced the signing of top Hong Kong driver Kendrick ‘King’ Fong to their factory team from 2022 and beyond. Kendrick will now use the full range of Dash RC electronics, including ESC, motor and accessories from the brand to race and represent in the best possible way.
Source: Dash [dash-rc.com]
New for the Infinity IF14-2 and IF14-2 FWD from Creation Model comes three new option parts. First up for the FWD is the flex bridge graphite top deck that features the same adjustability offered on the IF14-2 and which allows you to tune the chassis flex of the rear section of the car. Next up, also for the FWD, is this upper arm mount upgrade set that allows you to adjust the camber link length and height to perfectly tune your setup for any conditions. Finally there is a new 4 degree hard c-hub set which by using it you will notice increased response and improved steering from the beginning to the middle part of the corner.
Hasi Tuned are starting 2022 with a bang with the announcement that they have signed Silvio Hächler and Simon Kurzbuch for 2022 and beyond. Silvio is a Swiss National Champion, while Simon is a former World Champion as well as multiple ENS series champion. Both drivers will be powered by Hasi Tuned engines as well as use the brand’s exhaust systems and accessories.
Source: Hasi Tuned [facebook.com]
Creation Model have introduced 4 new Infinity titanium screws, the first of which is this UFO head M2.5x6mm screw. Machined from high quality 64 titanium material it can be used to attach the anti-roll bar holder of the IF14-2 and IF14-2FWD. The other 3 screws are slim head screws that come in M3x8mm, M3x10mm and M3x14mm. The M3x8mm replace the steel slim head screws used to mount the rear chassis stiffener on the IF14-2FWD these will reduce weight and allow for fine chassis flex tuning. The M3x10mm are a direct replacement of the steel rear body mount screws of the IF18-2 and IF15W. And finally the M3x14mm slim head screw replaces the steel slim head screws used in the installation of the IF18-2 front blocks. The wrench size used is 2.0mm, and can also be tightened with a firm torque.
View the slim head screws here
From Xpress is this graphite adjustable wheelie bar for their Dragnalo DR1S. Graphite components allow for more stability on launch and a more securing mounting with the included aluminium mounts. It features an adjustable angle with the included graphite rod to adjust the height and length of the bar.
Pro-Line is proud to announce a partnership with one of the leading performance tire manufacturers, Toyo Tires. This collaboration begins with their first tire for the popular Arrma 1/7 Street Bash line of vehicles, the Toyo Proxes R888R. All the details from the full-size high-performance competition tire have been recreated to give your Infraction or Limitless the ultimate in scale looks, street performance and long-lasting wear. The Proxes R888R is known for extreme grip, cornering, and braking stability in the full-scale world on track, and it’s no different in the RC world as these tires will transform the handling of your car or truck. The large tread blocks on the outside tread maximise lateral grip while the wide centre rib improves directional stability for all-out speed runs. A High-Performance herringbone weave pattern Belt reinforces the inside of the Proxes for high-speed runs, while their S3 compound provides long-lasting tire wear. They come pre-mounted on Black 5-Spoke Arrma wheels so you don’t have to worry about gluing your tires or waiting for them to dry.
View the 42/100 front/rear tires here
For the Infinity IF18-2, Creation Model have released this rear carbon body mount. Compared to the standard plastic rear body mount, this new carbon mount increases the height of the body by 3mm. In addition, the cross-sectional shape of the carbon plate and A7075 adapter matches the latest body shapes such as EXTREME’s Diablo and Protoform’s R19 without any gaps. This allows the downforce to be transferred to the tires without loss and improving rear grip. The left and right carbon plates can be fine-tuned with set screws to accommodate individual body shapes. The connection to the car body can be made in three step width directions and also absorbs the twisting of the mounting part when toe-in is applied.
