Red RC » P On Road

January 24, 2019

Icon RC TC7.2 bulkhead alignment tool

Coming from Icon RC is a bulkhead alignment tool specifically made for the Team Associated TC7.2 and TC7.1 cars. Machined from high-quality 7075-T6 aluminium and coming with a hard surface coating and machined silver edge details, the tool helps to perfectly align the front and rear bulkhead halves, ensuring less chassis tweak and improved drivetrain efficiency due to less stress on the drivetrain bearings. The tool measures 20.5x27x53.5mm and it is available from end of January.

Source: Icon RC [iconrc.it]

January 24, 2019

Infinity IF18 aluminium servo saver set

Infinity has released a new aluminium servo saver set for their World Championship winning IF18. The new design mounts the steering rod to the upper side greatly improving adjustability and maintenance. Also, by changing and optimising the arm length of the servo saver, the steering response will be higher than before.

Source: Creation Model [creationmodel.net]

January 24, 2019

Revtech 2S & 3S drag racing battery packs

Trinity have announced the release of their new Revtech 2S and 3S pro level drag racing LiPo battery packs. Available as 4000mAh 2S and 3S variants, the 220C-rated batteries are produced with higher grade safer materials, which results in longer battery life. The new assembly technology limits cell puffing, resulting in a more durable and impact resistant battery. The 2S pack measures 92x44x23mm and it weighs in at 208g while the 3S battery measures 92x44x34mm, weighing in at 302g. Both come pre-wired with ultra-thick 8 gauge but no battery connector.

View the 3S battery pack here

January 24, 2019

BRCA 1/12th Nationals Rd4 – Report

The fourth round of the 2018/19 BRCA 1/12th nationals took place at North West Raceway near Birkenhead. This was a new venue for this year and the club laid a technical and challenging track layout. A capacity entry of 80 drivers were treated to a fantastic weekend of highly competitive 1/12th circuit racing. On Saturday racers competed in the 13.5 blinky stock championship with the field split into F1, F2 and F3 grades. In F1 Andy Murray took his second pole position of the season in as many meetings and was the only driver to post a 36 lap time. Championship leader David Spashett lined up second with Adam Catchpole third closely followed by a tenth of a second by Mark Stiles. In an action packed final Andy Murray stretched an early lead before a small mistake dropped him down to third behind David and Adam. Managing to pass Adam he set off after David but once in the lead David drove a smooth and consistent race and never looked back taking his third win of the series. There was then a battle for the remaining positions with Ollie Payne, current European stock champion who started an uncharacteristic sixth on the grid making a move to finish second. Adam Catchpole won his battle with Andy by the narrowest of margins to come home in third. With three wins and a second place so far and two round of the championship to go David Spashett now has one hand on this seasons trophy.

Continue reading the report here

January 24, 2019

Yeah Racing M07 reversible rear hubs

Made for the Tamiya M07 M-chassis and coming from Yeah Racing are new reversible rear hubs that allow to switch between 210mm and 225mm wheelbase settings. The clever design not only allows to easily change wheelbase settings but in addition it retains the upper camber link ball stud position, meaning there is no need to adjust the setting when swapping over the hubs. The parts come black anodised, with machined silver edge details and including a hardware package.

View another image here

January 24, 2019

Pro-Spec 54g & 37g battery balance weights

Pro-Spec have released two new battery balance weights in 54g and 37g specification. The 54g weight measures 138.5×46.5x1mm and thus it is ideal for all cars using standard-size LiPo packs while the smaller 37g weight measures 95.5×46.5x1mm, ideal for all cars, buggies and trucks using shorty-type batteries. The weights come machined from high-quality brass material, they sport a natural finish and engraved ProSpec logos. Using the weights will help to either achieve an optimised overall chassis balance or to add weight when running the latest generation of lightweight LCG batteries.

View the 37g shorty battery weight here

January 24, 2019

1up Racing high-strength servo mounting screws

Coming from 1up Racing are their new high-strength servo mounting screws. Machined from ultra-strong U.S. 7075-T6 aluminium and coming black anodised and with a mirror-like chamfer, the screws fit snuggly into the servo’s outer lashes thanks to a 4.2x2mm neck that keeps the servo in place even in hard crashes. With their 7.8mm outer diameter and 4mm threads the screws, that come in packs of four, fit the most popular servos used with 1/10 cars.

Source: 1up Racing [1upracing.com]

January 24, 2019

HRC Racing 4900mAh racing pack LiPo battery

HRC Racing have introduced their new racing-pack-style 4900mAh hardcase LiPo battery pack. The oval diameter battery mimics the outer appearance of a NiMH racing pack and is ideal for ready-to-run cars, older-spec Tamiya and Kyosho vehicles, starter boxes and other applications that require this specific battery specification. The battery is built using quality 30C cells and it is available with T-type or Tamiya-style plugs.

View the other battery pack here