Red RC » P On Road

November 12, 2018

Louth RCCC Schumacher Winter Series Rd2 – Report

The second round of the Schumacher Winter Series presented by the Louth Radio Control Car Club was held this past weekend. 60 entries across four classes made for a competitive field spread out over the 13.5 Blinky class, 17.5 Open, GT12 and Tamiya Truck. In 13.5 Blinky Chris Lovely was able to take the TQ spot with a commanding pace with his Xray as debutant Craig Mawson would line up 2nd with his Schumacher, Andrew Green 3rd, Championship leader Nathan Winyard 4th and Mikey Mansell and his Capricorn 5th. Chris was able to bridge a gap after the first few corner tussle which saw 2nd, 3rd and 4th swap on many occasions. Ultimately Nathan Winyard would power through to 2nd, and Andrew Green would secure the final spot on the podium.

Continue reading the report here

November 12, 2018

Arrowmax 3.7V 8000mAh LiPo battery pack

Coming from Arrowmax is their new 3.7V 8000mAh Si-Graphene series LiPo battery packs for 1/12th scale applications. The no compromise pack is of 60C/120C rating for high discharge rates in Modified and Stock racing, ensuring exceptional power supply even with power-hungry motors or on demanding tracks. The hardcase battery utilises 5mm connectors and it is available now.

Source: Arrowmax [arrowmax-rc.com]

November 12, 2018

Infinity IF18 rear body mount spacer

Infinity has introduced an optional aluminium body mount spacer for their IF18 1/8th nitro on-road chassis. Used together with the optional 1-piece carbon mounting plate, the spacer offers extra body post stability and is available in both silver and red.

View another image here

November 10, 2018

1up Racing carbon fibre body washers

1up Racing have introduced their new carbon fibre body washers for 1/10th touring cars. They increase the lifespan of the body and do away with annoying scratches and scuffs from the body mounts as they attach to the inside of the body using 3M extreme adhesive tape. Even as the body ages the mounting holes will remain perfect and crack free and they use easy peel-and-stick application. The washers are only 0.25mm thick and a set of four weighs less than 0.5g. 6.5mm inner diameter fits all popular 1/10 touring cars. 1/12 and 1/8 on-road variants are at a later stage as well as 1/8 off-road pieces with feedback from Ryan and Louis Cavalieri.

View another image here

November 9, 2018

Xray X1 2019 1/10th formula car kit

Xray have announced the release of their X1 2019 1/10th formula car kit. The 2019 variant of the IFMAR World Cup winning car received some subtle updates to make the popular platform even more durable and also easier to work on. First up are new front lower suspension arms that were reshaped for improved durability, they are of a harder material for less flex and allow to adjust the front track width for a narrow or wide setting. The old-style arms are still usable and act as a tuning option for low-grip tracks for hard hand out tyres. To make maximum use of the new track width settings the 2019 kit also comes with two upper arm mount plates for tyres like Hudy and Volante. An updated aluminium servo mount rounds out the front suspension package as do new, softer C=2.0 front springs that are an all-round option for both carpet and asphalt tracks.

Continue reading here

November 9, 2018

2018/19 RugRacers Rd2 – Report

Round 2 of the 2018/19 RugRacers series started with a full capacity entry. The new corners from the opening round proving popular with the drivers, making the track space bigger and racing closer and this round would see a very fast layout. 13.5 Blinky Touring was extremely close. Ashley Wiffen set the FTQ pace in rounds 1 to 3 with Jamie Hickin taking FTQ in round 4 by three hundreds of a second to snatch pole position, the Finals would see Jamie lead away and Ashley lay on heavy pressure, despite this Jamie held on to take the win ahead of Ash with Phil Vickers finishing 3rd overall.

Continue reading the report here

November 9, 2018

Team Associated now available on Shapeways

Team Associated have announced their new Shapeways store for 3-D-printed products such as 6.1 and RC8B3.1 series optionals as well as scale accessories. The range includes items such as fan mounts for the B6.1, T6.1 and SC6.1, RC8B3.1 and T3.1 receiver boxes, transponder and switch mounts as well as wing splitters and also available are several scale accessories for the CR12 series of trail trucks. All parts are 3-D-printed and they are available directly through AE’s Shapeways store.

Source: Team Associated [teamassociated.com]

November 9, 2018

STRC Traxxas 2WD aluminium wheelie bar set

Coming from ST Racing Concepts and made for Traxxas 2WD off-road vehicles such as the Slash, Rustler and Bandit is a new aluminium wheelie bar set. No prep RC drag racing is the new growing segment of RC and with minimal parts, owners can now change their old Traxxas Slash 2WD, Rustler or Bandit into a hot rod drag racing machine. One of the key component in converting the vehicle to a dragster is the long rear wheelie bar kit. STRC’s CNC machined aluminium wheelie bar kit features seven inch in length with an adjustable angle, double or single wheel setup options and solid aluminium ladder frame construction. The wheels are of high quality bearings for the smoothness rotation. Compatible on Slash 2WD, Rustler, Bandit, with the preferred chassis would be a Slash 2WD LCG.

View more images here