This stylish Hudy hard case has been designed specially for the Sanwa MT4, MT44 & M17 transmitters. Made from the highest-quality materials, combined with expert workmanship, ensure the durability and long life of this hard case. The upper lid features inner net pocket with a zipper while outside sports a stylish and cool design with full-colour Hudy graphics. Size 185x220x145mm.
Introducing the new Core RC Hi Response long springs for offroad buggies. Developed by Schumacher engineers and high level drivers over a wide range of conditions, from low grip dirt to high grip carpet, these springs have been made to improve the responsiveness of the cars, compared to the alternative Core RC and Schumacher big bore springs. They feature less coils and have a thinner wire diameter and they also offer a handy weight saving, by an average 4 grams per pair over previous Core RC Springs. For use on the rear of the Cougar Laydown, Cat L1 Evo and other cars using big bore shocks. Available individually in red (2.0 lb/in), green (2.2 lb/in), blue (2.4 lb/in) and black (2.6 lb/in) or as a complete set of all four.
Contact have announced that their recently released LMP12 wheels are now available separately, unmounted. The available range of wheels includes the new hex fitting wheel for the Eclipse 4, front wheel as well as the standard 3 bolt rear wheel. The wheels are supplied pre-scratched for better glue adhesion.
From OfficinaRC come more titanium goodness with the introduction of their line of UFS screws. Made of titanium with the best precision machines by experts Italian craftsmen these screws can count on a head thickness of only 0.9mm. Below the extremely thin head there’s a cylindrical shank of 1.4mm that allows a perfect centering without preventing tightening. Particularly suitable for top decks with 1.6mm thicknesses and shock tower. OfficinaRC ‘UFS’ Titanium are made in various sizes and available in kits for the most popular models. Ti-6Al4V is the most widely used titanium alloy in the motorsport and aerospace market and this alloy contains 6% aluminium and 4% vanadium, an excellent combination of toughness with extra resistance to corrosion. The UFS ‘Deep’ version has been specifically designed to be used in Awesomatix and Mugen steering blocks.
Team Associated announce the release of the Pro4 SC10, a Ready-To-Run RC electric Short Course truck. It features some major upgrades not normally found in RTRs, including a water-resistant high-power Reedy brushless speed control, Reedy 3300kV brushless motor, water-resistant enclosed receiver box, adjustable oil-filled coil-over shock absorbers and four-wheel independent suspension. Drivetrain features three heavy-duty sealed gear differentials and the short course proudly rolls and jumps on Fifteen52 Turbomac HD wheels wrapped in realistic off-road General Tire GT Grabber all-terrain tires. The 2.4GHz 2-channel radio system includes an adjustable digital gyro, which allows vehicle stability to be adjusted to match the terrain and a digital high-torque Reedy servo round out the Pro4 SC10 as a potent short-course contender.
RDRP presents their new -1° D suspension block for the Associated B6.2 2WD buggy. With this item, it is possible to either reduce rear toe-in for less rolling resistance and more corner speed on high-bite surfaces such as carpet and Astroturf, or to run your rear arms in a narrower position for more roll on slippery tracks. Machined from durable aluminium and black anodised, it has chamfered and polished edges for looks and of course is compatible with the full range of Team Associated B6.2 pill inserts.
New for the Infinity IF14-II is this HBP (Horizontal Body Post) mount set for mounting the body posts in a horizontal position at the rear end of the car. By mounting the rear body posts horizontally the centre of gravity around the rear of the car is lowered and the downforce of the body is transmitted more efficiently to the chassis, improving corner speed. When using the HBP mount it can be difficult to accurately position the rear body post holes in the bodyshell. By using their new rear body height fitter it is quick and easy to precisely position the body post holes at the desired body height.
Hudy Premium silicone oils are now available in a number of new weights. Adding 375, 425, 475, 525, 575, 625, 675, 9000, 11K and 12K to the already extensive line up, the easy-to-store bottles feature flip button cap and easy to read viscosity collar which is colour-coded to instantly recognise the type of viscosity. The bottles are factory sealed for leak prevention during transport and are available in 50ml and 100ml volume. The silicone oils are made in Europe and laboratory tested and calibrated to ensure each batch has the proper viscosity. The oils are available in an extensive line-up of all popular viscosities.