Red RC » P On Road

June 20, 2014

Mizan wins 200mm class at Malaysian nationals Rd3

Mizan wins 200mm class at Malaysian nationals Rd4

The 3rd round of the Malaysian nitro on-road national championship took place at the MPJBT track in Johor Bahru, Malaysia. A total of over 40 racers in the 200mm touring car class competed for championship points. Right after the start of the 45 minute final Shepherd racer Mizan, who qualified 2nd, took over the lead although he had to conserve his tyres as he did not plan to do a tyre change. His strategy paid off and he crossed the finishing line after 179 laps in first position, one lap ahead of Azri Amri with Amirul Shafiq completing the podium another 8 laps down. Thanks to the round win Mizan has now also taken over the lead in the MNC overall standings.

Source: Shepherd [team-shepherd.com]

June 20, 2014

Christophe Pethoud wins Swiss 1/8th champs Rd3

The 3rd round of the Swiss 1/8th nitro on-road championship was run at the famous Lostallo track. The qualifiers where held in sunny and hot conditions making for some tight racing. As usual on the fast track fuel consumption was critical and some drivers, like Christophe Pethoud, had to refuel in the final lap. After qualifying Remy Hasler (Mugen/Picco) took TQ followed by Claudio Pasquin (Xray/Picco) and Renato Ali (Mugen/Picco).

Click here to continue reading the report

June 19, 2014

ZZRacing ABEC-3 bearing sets

Following stainless steel and titanium screw sets aftermarket company ZZRacing now also offers a huge amount of ball bearing sets for a wide range of cars, buggies and trucks. Using ABEC-3 specification bearings the sets are available for kits such as the 3Racing Sakura XI and Zero S, the Team Associated B5/B5M, RC10 Worlds and RC8.2, Xray’s XB4, XB8 and T4, Mugen’s MBX-6 and MBX-7, as well as TLR’s 22 and 8ight series. Also available are imperial standard and flanges bearings.

Source: ZZRacing [zzhobby.com]

June 19, 2014

Gravity RC body height adjusters

Gravity RC have a set of body height adjusters for touring and 1/12th pan cars available. Offered in 6mm diameter for 1/10th applications and 5mm for the smaller 1/12th scale cars, the parts are made from machined aluminium and they are very light of weight. They help to exactly adjust the body’s height and rake as every 360 degree turn of the rotatable mounting tubes results in 0.5mm height gain or loss. Each touring car set contains four threaded body post adapter, four threaded body mount tubes and four rubber O-rings while the 1/12th set includes two of each of the above parts.

Click here to view the 1/12th scale set

June 19, 2014

EFRA & IFMAR clarify gyro illegality

Recent rumours about the use of gyro technology in EFRA sanctioned events made it necessary for Dallas Mathiesen, president of both EFRA and IFMAR, to clarify that the use of driving aids such as gyros, traction control and active suspension devices are strictly forbidden in EFRA and IFMAR sanctioned events. Drivers found using forbidden items will be subject of a severe penalty, such as a long term ban from all EFRA and IFMAR events.

EFRA has not and will not declared Gyro as legal. Neither could it be found anywhere in the IFMAR rules that it is allowed to use a Gyro as a driver aid in a Radio Controlled car.

The statement in full can be found on the EFRA website by clicking here (PDF file).

June 19, 2014

Zen Racing touring car chassis tweak tool

New from Zen Racing comes this chassis tweak took for 1/10th touring cars. The set includes a carbon fibre board with rubber feet and a carbon fibre rod and it is very easy to use. Simply undo the top deck screws on the touring car, place the car on the flat plate and use the graphite tube to push the car down on the shock towers to flatten out the chassis. The tube has rubber end caps to protect the graphite while the board is made from a high quality carbon composite material ideal for the purpose.

Source: Zen Racing [zen-racing.co.uk]

June 19, 2014

SARDA ORE national championship Rd2 – Report

The 2nd round of the 2014 South-African ORE national championship was held at the Welkom RC Track. A cold front hit South Africa and the tire warmers got turned up but the great indoor track managed to keep the drivers happy and the programme on schedule. The Touring Modified class once again provided some spectacular high-speed racing. The local hero Antonio Caroli took TQ honours but due to some unlucky incidents in the finals he would only end in 6th place overall. At the end it was Hein Kotze who dominated with faultless driving in all 3 finals. Anderton Smith and Deon Gove managed to grab the final two podium spots.

Click here to continue reading the report

June 19, 2014

Kyosho MR-03VE JSCC blue limited edition chassis

Kyosho America introduce a blue limited edition 50th Anniversary chassis kit of the brushless-powered MR-03VE. Based around blue-colour chassis parts the car features full ball bearings, a rear ball differential, gold-plated battery terminals and a Team Orion XSpeed Eco brushless motor. Included are also modification parts for a MM-type motor mount and a front wide tread conversion. Not included are wheels, tyres, a body and a 2.4GHz ASF-compatible transmitter.

Click here to view another photo