Red RC » P Off Road

April 25, 2011

Yannick Aigoin takes Rd2 of French Nationals

Round 2 of the French 1/8th scale buggy nationals took place in Reims in the north of the country and it was bright sunny weather that greeted the competitors, a change from the wet conditions that forced the finals in round 1 to be cancelled. With a lot of French racers competing at this weekend’s Neo 11 race, Rd1 winner Jerome Aigoin being one of those, only a handful of the top drivers were present, hoping to get some all important points. Qualifying went the way of Losi driver Yannick Aigoin ahead of Durango team driver Renaud Savoya who came over from Dallas for the event. Jerome Couchon, Sebastian Wartelle and Tony Robin completed the top 5. With no major problems in the semis, the top two placed on the grid for the main final remained the same. In the final Savoya hit problems early one with a suspected locked wheel, which dropped him out of contention. Yannick cruised up front and took the victory by nearly 2 laps ahead of Romain Valter driving a Mugen with Kyosho driver Tony Robin in 3rd, 8 seconds further back.

Source: RC Mag [rcmag.com]

April 24, 2011

Werks Racing B6 & B5-Pro engines

Werks Racing have announced the release of their new B5-Pro and B6-Pro engine. They left the basic performance characteristics of the aggressive bottom and strong mid/top of the B5 and the super smooth and linear power band of the B6 in place and just made them better with these new Pro versions. By incorporating ceramic rear bearings and a lightened and epoxy filled crankshaft in the Pro versions, engines will now spool up faster providing increased acceleration and fuel economy. Black anodized crankcases not only look sharp but also provide for increased heat dissipation. A billet CNC machined rear back plate reduces weight and increases rigidity of the case assembly. A new heat insulation sleeve material improves carburetor performance and reduces the likelihood of heat saturation. Finally everything is topped off with a new, large diameter cooling head which not only improves heat dissipation but also lowers the overall CG of the engine by reducing weight by 5% over the standard B5 & B6 heads and an amazing 10% over their 2010 head design.

View more images here

April 22, 2011

DE Racing D8 Hara Edition mud guards

DE Racing has just released these new mud guards for the Hot Bodies D8 Hara Edition. They have been altered from the originals to accommodate the use of optional threaded hinge pins in the rear hubs as found on the Hara Edition. Sold as a pair, they come supplied with fasteners.

Source: DE Racing [deracing.net]

April 21, 2011

Hupo Honigl dominates 2wd at Austrian opener

The first round of the Austrian 1/10th off road nationals was held last weekend in Simmering, Vienna home to the 2003 European Championships. Hupo took his DEX210 Prototype to a comprehensive victory. Hupo took all four qualifiers to secure overall TQ and set about the finals in the same manner, taking both opening legs of the A-Main to take the win. Hupo took 3 out of the 4 qualifiers in the 4WD class with his DEX410 for the TQ position and #1 for the finals. An amazing series of finals which saw battles with fellow Team Durango star Martin Kriel for the lead. Hupo needed to take the last leg of the A final to take the win and lead by 4-5 seconds until close to the end when a bearing failure cost him the win. Team Durango DEX410s finished 2nd, 3rd and 4th.

Source: Durango [team-durango.com]

April 21, 2011

Associated high-torque slipper pads

Associated have introduced their new high-torque slipper pad design with maximum surface area for more torque capacity. It allows for adjusting drive torque bias on the SC10 4×4 using the included decoupled slipper and is recommended by team drivers for the SC10 4×4 outer slipper pad (rear drive) for more rear drive out of corners and for jumps. Suitable for the SC10 4×4, SC10 FT, B4.1 FT, T4.1 FT, B44.1 FT and all older generations of SC10, B4, T4, B44.

Source: Associated [rc10.com]

April 21, 2011

Team Orion Vortex MR8 & MR8L motors

Team Orion have released their all new Vortex MR8 and MR8L 1/8 sensored brushless racing motors. Equipped with sensors for perfect throttle control and a 4 pole rotor for improved performance, they come in two versions, regular length for buggies and XL for truggies and monster trucks. Available in 1750 KV, 1950 KV, 2100 KV, 2400 KV, L 1500 KV, L 1750 KV, L 1950 KV L 2100 KV and L 2400 KV versions.

Source: Team Orion [teamorion.com]

April 20, 2011

FTW Blade and Vane TLR22 shells

FTW Racing Components have introduced their Blade and Vane bodies for Team Losi Racing’s new 22 1:10 2WD off-road buggy platform. Both Blade and Vane are designed to fit the 22 in both its mid and rear motor configurations and each offers a unique aero package for the 22 racer while sporting the distinctive styling the world expects from FTW. Both bodies come packaged with two wings, window masks, and a decal sheet. Two sets of molded cut-lines facilitate trimming of both bodies to fit the 22 in both motor configurations.

View the Vane shell here

April 20, 2011

JConcepts Spring Indoor Nationals report

The second stop of the JConcepts Indoor National Tour descended upon the popular OC/RC Raceway in beautiful Huntington Beach, CA, and many of the top So Cal pros were in attendance vying for the title of Spring Indoor Champion. Team Associated/Reedy/LRP was in full support, as was title sponsor JConcepts with most racers competing on Gold Barcodes. The fluid layout challenged racers to maintain a sharp focus as lap times dipped in to the 16-second range with speeds reaching 30+ mph on the straightaway. Combined with the high-grip and low-dust surface, some racers chose to compete on full slick tires while others used a combination of used tires that resembled slicks.

Continue reading the report here