Red RC

November 18, 2015

STRC B5M 3-gear aluminium motor plate

New from STRC comes the 3-gear aluminium motor plate for Team Associated fifth generation vehicles that use this specific gearbox setup. The CNC-machined motor plate features milled heat-sink fins to help dissipate heat from the motor and also elongated motor screw hole slots to allow for larger pinion gear to be installed without having to change out a spur gear, making it great for 17.5T stock racing. The motor plate is available in anodised blue, stealth black, gun metal and natural silver.

View the other available colours here

November 17, 2015

Vampire Racing 2S all-black charging lead

Available now from Vampire Racing is the 2S all-black charging lead in long configuration. The 60cm charging harness comes pre-soldered with 4mm gold-plated bullet-type connectors and an XH balancer on the charger side and and stepped 4/5mm dual plugs and a 2mm balance connector for the battery side which allows to charge 2S LiPo packs with both industry-standard 4mm connector tubes as well as the newer batteries with 5mm tubes.

Source: Vampire Racing [vampire-racing.com]

November 17, 2015

Adam Drake dominated 2015 JBRL Nitro Series

The JBRL Nitro Series recently completed its 9th season, visiting eight tracks this year. Mugen Seiki’s Adam Drake was the man to beat in the Nitro and Electric Pro classes as he made the triple by winning both the Pro Nitro Buggy and Pro Nitro Truggy as well as the 1/8th E-Buggy categories. Runner up in the Nitro Buggy class was Cody King (Kyosho), Steve Harris (Mugen) rounded out the top 3 result. In the Truggy class it was again Cody King who came in second while Aaron Gomez completed the podium result. Finally in the 1/8th E-Buggy class Adam was sidelined by Mugen teammate Steve Harris and Tekno RC driver Anthony Westergaard.

Source: Novarossi [novarossi.it]

November 17, 2015

Exotek 22T Flite titanium front axles

Exotek have introduced the Flite titanium front axle set for the TLR 22T series racing truck. Precision machined, the axles weight in at only 3.6g per piece and they help to reduce the rotational mass as well as unsprung weight. The corrosion resistant titanium material is ideal for racing on damp track conditions and the axles are usable both on the original 22T and the newer 2.0 kits. Included is suitable inner mounting hardware.

View another photo here

November 17, 2015

Samix aluminium servo arm for Axial vehicles

Coming from Samix and made for Axial’s SCX10, XR10, AX10 and Exo off-road vehicles is a clamping design aluminium servo arm. Made from aluminium and coming in a 23T and 25T spline variant the arm offers 16mm and 20mm spaced, threaded mounting holes while the clamping design makes for a secure mounting even in high-stress applications. They come in four different colours and sport etched size markings for easy identification.

Source: Samix [rcsamix.com]

November 17, 2015

Danish Electric On-road Nationals Rd2 – Report

Round two of the Danish Electric On-road Nationals were held in Faxe on a purpose-built track. In the Touring Car class Mike Gosvig (Xray) dominated the qualifiers by winning all three rounds with a margin of four to eight seconds on the second place driver. Behind Mike, Frederik Brolos (Yokomo) and Soren Boy (VBC) had a good battle for the runner-up spot with Frederik taking three second place finishes while Soren ended the qualifiers in third. Young Xray driver Patrick Danielsen grabbed the 4 spot on the grid.

Continue reading the report here

November 17, 2015

Sweep Racing Square Armor 2.4″ buggy tyres

Sweep Racing Square Armor 2.4" buggy tyres

New from Sweep Racing come the Square Armor 2.4″ 1/10th scale buggy tyres. Designed to fit the company’s 61mm rims with 2.4″ inserts the tyres are specially developed for racing on dusty outdoor conditions where maximum traction is needed. They come in ultra soft, extra soft, soft and medium compound as tyres only or pre-glued on 12mm hex rims.

Source: Sweep [sweepracing.com]

November 17, 2015

Intech ER-12M 2.0 1/10th 2WD buggy kit

Following a first teaser image Intech have now released more photos and information on the forthcoming ER-12M 2.0 mid-motor buggy kit. The follow-up model of the ER-12 is of a simple to work on design and based on a black anodised aluminium chassis with alloy side rails that also act as battery mounts for square, saddle or shorty pack batteries. The battery mount is made of two carbon fibre strips and alloy thumbs nuts. In the front of the very narrow chassis sit aluminium braces for the alloy upper steering plate and a lightweight composite frame acts as the steering servo mount . Part of the package is also a 4-gear mid motor gearbox with ball differential and also included are standard bore yet large volume alloy shock absorbers. The kit is set for a release early in December.

View more photos here