Red RC

May 12, 2013

Hobby Arena Romania grand opening

Our friends in Romania got in touch to tell us about their all new state of the art track which recently held their grand opening event. The Hobby Arena track saw hundreds of people come out to enjoy the event and track in Frumusani near Bucharest, not just from all around Romania, but they also had international visitors from Bulgaria, Italy, Hungary, Austria and Switzerland. The opening day was not only the occasion to present the track, it was a festival for the hobby and fun, everything for rc car enthusiasts, whether they are professionals or just hobbyists. The hosts, representatives of Hobby Arena, Autorc Hobby Store and Motosport Racing Team Club, spent every effort to make everybody feel at home. Soft drinks, soda’s, beer, even some meal, everything provided. This is the biggest project of its kind in Eastern Europe, and yes, this was a rc car festival.

View more details & photos here

May 11, 2013

Xenon VSS 1/12th scale front-end

Xenon Racing have released details about their soon to be released VSS 1/12th scale front-end. Made to a very high quality it will be compatible with the Associated R5 and L4 and other direct drive pan cars. Available in regular or hard material Xenon are the first company to allow you to choose the kingpin angle for the front knuckle from 6 steps (0-5 degrees). Other features are its easily adjustable width using screws from the outside of the lower arm as well as a two part upper arm with turnbuckle adjustment. The bulkhead has been made from 7075 aluminum and will be available in blue or black while the king pin and hinge pin have been been made from coated titanium.

View images of the kingpin angles here

May 11, 2013

WRC F-One steering option parts

Italian firm WRC have announced some new parts for the front of the F-One chassis. First up is a new threaded front king pin and nut which replaces the previous version which used a c-clip so the new version is easier to assemble and more reliable. Next up is a new front steering hub made from a combination of aluminium and carbon fibre, super high quality and lightweight. Next up continuing to focus on the front end are new high quality and lightweight aluminium wheel axles. Finally for the shock absorber are new 3 hole pistons for increased tuning options.

View more images of the front end here

May 10, 2013

Pro-Line Proton tire sneak peek

Pro-Line have shown off a sneak peek of their new 1/10th rear buggy tire called the Proton. No information was given along with the image but we do know that this will be made available at first in the MC clay compound. We can expect more details in the coming days.

Source: Pro-Line [prolineracing.com]

May 10, 2013

John Ermen wins Benelux Cup

Last weekend the Benelux cup was held in Bierset, Belgium and John Erman filed this report. ‘It was a little bumpy track with medium grip and a long straight. On Saturday we had some practice to setup the new Xray RX8 2013 spec car. I had some problems with the track layout as it was the first time for me on this track. But at the end of the day I had a good setup and the car/engine combination was good to go. On Sunday the weather was perfect, around 25 degrees and sunny. We had 3 qualifications and I was able to get 2nd position tight after Robin. In the last qualification I changed from the Blitz ARX to the Blitz R18 v2 body and the car was instantly better to handle but because some back markers I was unable to improve my time any further. But the car felt allot better than in the first 2 qualifications, so I was confident for the final.

Continue reading the report here

May 10, 2013

TLR 22 low frequency spring sets

TLR have released front and rear sets of Low frequency springs for the TLR22 buggy. The Low Frequency Spring Sets allow for a more plush suspension feel with increased grip and more stability. The five rear springs are only separated by .05 lbs/in increments while the four front springs are only separated by .12 lbs/in increments allowing for very fine tuning to get your 22 vehicle dialed in. The lower frequency springs also land better allowing for a mellow rebound as the car settles quicker and more consistently.

View the front spring set here

May 10, 2013

JConcepts Associated front axles for 12mm hex

One of the best upgrades you can make to the Team Associated line of vehicles is a conversion to 12mm hex wheels. JConcepts has been on top of this conversion since its introduction with hex adapters and Mono wheels. A critical point of the conversion revolves around the front axle and surrounding geometry. Within the steering block the space is very tight and especially between the 2 front bearings where the front axles rests between the bearing bores in 1 plane and the king pin in the perpendicular plane. The JConcepts front axle design is based around high-grade titanium construction, an outer bearing crush step and an inner 4-40 locknut for security. The design eliminates c-clips, screws and other items which are hard to detect of issues which limit performance. Available or the B4.2, T4.2 and SC10, this free spinning design includes axles, 4-40 mini lock-nuts, thin axle shims, decal and assembly instructions.

View the other axle sets here

May 10, 2013

FTW Phoenix shell for MBX6T

FTW have released their latest Phoenix shell for the MBX6T. Every different make of chassis is evaluated during the body design process in order to achieve performance beyond the acceptable. To reduce the tendency for body disintegration caused by the recessed front body mount location of the MBX6T, this Phoenix version is equipped with a kit that raises the front body mounts, allowing for a sleek and smooth hood area. The kit is comprised of a beefy .93″ thick polycarbonate bracket and all necessary hardware. Installation is quick and eliminates the weak spots that plague other body options for the MBX6T. Formed from premium grade clear .040” polycarbonate sheet it comes with a clear protective outer film.

View another image of Phoenix here