Red RC » P On Road

July 5, 2017

Buri Racer E1 carbon fibre motor fan mount

Coming soon from Buri Racer and made for the E1 1/8th electric on-road car is a carbon fibre motor fan mount. The part is machined from high-quality carbon fibre and its mounting pattern allows to mount two 30mm or one 40mm or 50mm fan unit to ensure improved motor cooling when running low turn/high kv motors or when racing in hot ambient temperatures. The mount attaches to the rear motor mount and it will hit stores soon.

View the mount in combination with a 50mm fan here

July 5, 2017

Mikkelsen wins Norwegian Nitro Touring Series Rd3

The third round of the Norwegian Nitro Touring Series was hosted by the Valdres Modellbilklubb on one of the more spectacular tracks of the series with its length of 205 meters and almost 3.5 meters of elevation change. The blazing sun brought high temperatures, making it a real challenge for both drivers and cars. In the opening qualifier André Roine took the win closely followed by Anders Mikkelsen, some 0.8s behind. Mikkelsen then managed to take the TQ by 1,4 seconds in the second round but it was the final round that decided the TQ spot. At first Christian Hovden beat Mikkelsen’s time by 0,001 of a second but Mikkelsen fought back and got the TQ with a margin of 1.1 seconds while also setting the fastest lap time of the day.

Continue reading the report here

July 4, 2017

Team EAM Graphene 6000mAh LiPo packs

Coming from Team EAM are the new Graphene 6000mAh standard and LCG LiPo battery packs. Both are built using high-performance 110C cells whose Graphene technology makes for a lower internal resistance and greater reliability. The packs perform better under load, making them ideal for both modified and stock racing and as an industry first, they sport balancer ports on both sided of the case. As for the weight, the 25mm standard battery weighs in at 308g while the 23mm LCG battery weighs in at 288g. Both make use of 5mm bullet type connectors, they sport side labels that will not be ripped off by battery tape and they are available now.

View the LCG pack here

July 4, 2017

Serpent introduce new SRX8E & Project 4X optionals

Serpent have introduced new optional parts for the SRX8E 1/8th E-buggy and the Project 4X touring car kit. Starting with the buggy related part, new are carbon fibre saddle pack battery plates for the optional saddle pack battery layout. Cut from 2mm carbon fibre the plates are an optional replacement for the standard mounts, offering improved stiffness and thus making a good alternative when more chassis rigidity is needed. The set is a direct replacement and it is available now.

Continue reading here

July 4, 2017

2017 UISP Outdoor Championship – Report

The recent Italian UISP Outdoor Championship was held at the Tricolore race track in Reggio Emilia on a small to medium sized track. Classes run were Touring Modified, Touring Stock 13.5T and Touring Stock 17.5T. In the premier Modified class and after a battle that was decided in the final stages of the race, it was Walter Floris (Xray) who took the win from Adalberto Zapparoli (Xray) and Luca Torreggiani.

Continue reading the report here

July 4, 2017

Tesla GT Spec 3.5cc nitro on-road engine

Capricorn have introduced their new Tesla GT Spec 3.5cc nitro on-road engine. The power plant features a redesigned piston and liner as well as upgraded bearings with the updates resulting in an improved power band, making the engine better suited for the heavier GT cars. Part of the new engine package is also a dual balanced and silicone-filled crankshaft.

View another image here

July 4, 2017

Vigor RC BD8 ball-raced anti-roll bar mounts

Vigor RC have introduced ball-raced anti-roll bar mounts for the Yokomo BD8 touring car. Machined from 7075 aluminium and coming black anodised and with silver edge details, the parts will directly attach to the car’s front and rear bulkheads and their design with ball bearings makes for greatly improved precision and smoothness, resulting in greater suspension efficiency. The parts also do away with the need to adjust the swaybar slop, making for more convenient car building, maintenance and set-up. The set includes four mount and bearing and it is usable with the original centre swaybar tube.

View another image here

July 4, 2017

Tamiya TT-02 Subaru WRX STI NBR touring car kit

Following yesterday’s semi-official announcement of the forthcoming TB Evo.7 competition touring car, Tamiya now also introduced a new entry-level kit. Coming soon is the Tamiya TT-02 Subaru WRX STI NBR 4WD touring car based on the simple and proven TT-02 4WD on-road chassis. It features a shaft-driven transmission and it comes with a highly detailed Subaru bodyshell including moulded mirrors and rear wing. The kit is rounded out by grippy slick tyres on dark multi-spoke rims and it will hit stores in August.

Source: Tamiya [tamiya.com]