Shepherd have introduced the V2 battery mount for the Velox F1 formula car. It utilises a new carbon fibre battery brace/upper plate that accommodates a rubber O-ring to secure the battery pack while also shifting the pack about 2.6mm towards the rear for increased traction in lower grip conditions. Included in the set is also a redesigned shock plate with all parts being available separately for spares and repair.
Source: Shepherd [team-shepherd.com]
Coming from Fenix is a 2.0mm aluminium chassis for the Infinity IF14 touring car. Machined from 7075-T6 alloy and sporting a more narrow 83.5mm width, the fully symmetrical chassis weighs in at 79g and it comes black anodised and with milled out sections to optimise the flex characteristics.
The second round of the RC Maniacs Championship was held at the Argos track in Greece. Classes run were Touring Modified, Touring Stock 13.5T blinky, and Formula 17.5T blinky. Tyres were open but the Touring car drivers opted to use LRP’s G32 tyre as it is the handout wheel for the Greek championships, while the Formula class relied on the new Hudy Formula tyres. To increase fun and add a bit of spectacle it was decided to run the event in a Reedy race format with six of eight rounds counting towards the overall results. In Touring Modified Xray’s Michalis Kiriazis was a force but he had to leave early due to family obligations – a situation local driver Diamantis Sotiris (Xray) took advantage of to grab the overall win with Nikos Nikolakopoulos coming in close 2nd. Christos Vasilopoulos (Tamiya) finished 3rd ahead of another local Xray driver, Christos Kindis.
Continue reading the report here
Coming from ARC and made in collaboration with Savöx is the Super Response Servo tailor-made for the ARC R11 series touring car. The Super High Response technology provides quick steering response when used with modern transmitters while the incorporated servo mount makes installation easy in addition to saving 10g compared to the original servo mount. A short 50mm all-black receiver lead cleans up the wiring job for a full factory look. Equipped with a brushless motor the servo is able to pull up to 9.0kg-cm of torque at a transit time of down to 0.07s/60°.
Source: ARC [arc-rc.com.tw]
The Spanish 1/10th 200mm Nitro Touring Nationals were held at the Asoger track in Madrid in very hot weather conditions. The high temperatures and prepped track made for a lot of grip changes with Capricorn’s Victor Pelaez making the best out of the conditions as he took the overall TQ and pole position for the main final. Superpole winner Juan Hidalgo (Serpent) also scored a direct entry for the main while all other had to go through the sub finals. In the main final and after a good start Victor was out in front with Juan in 2nd and Sergi Franch and Jonnhy Pastor fighting for the 3rd spot. Later Juan was able to get past Victor in an amazing manoeuvre and from that moment on he never looked back. Unfortunately Victor suffered an engine problem later on making way fro Sergi Franch (Mugen) in 2nd and Jonnhy Pastor (Mugen) 3rd.
Source: Serpent [serpent.com]
Round 3 of the Austrian 200mm Nitro Nationals was held at the Graz track. Xray’s Oliver Havranek swept the qualifiers to start from pole position into the main final that would see the TQ holder struggle in the opening minutes. Later Oliver would keep his head down and he managed to catch up with Igor Liptak. After a tight fight Oliver was able to get past Igor and soon after it was started to rain heavily so the organisers had to stop the race that was scored at the current standings, handing Oliver the win from Igor in 2nd.
Maclan Racing have announced the new MR8.2 1/8 brushless series of motors. The MR8.2’s new design is set to deliver balanced power and smoothness thanks to a combination of a 12-slot stator with a strong, staggered 4-pole, 8-magnet rotor that is constructed to be smooth and powerful while increasing durability. An all-new error-free sensor unit design with separate sensor magnet will minimise the signal noise the often can damage speed controllers. The series will include 1500kv, 1950kv, and 2150kv buggy style motors as well as a dedicated 2100kv truggy variant.
Coming from RC Prostyle is a 2.25mm carbon fibre chassis set for the Xray X1 formula car. Constructed from high-grade U.S. made carbon fibre the chassis was designed especially for asphalt racing in medium to high-grip conditions. The super-narrow design and raised side links increase ground clearance during cornering which results in less scrubbing and improved corner speed. Included come two types of link plates, one for the standard Xray links and one for shorter 65mm links such as the ones used by Roche or Yokomo – using the shorter links will help gain on-power steering. Included in the set are the chassis, rear pod plate, side link plates as well as mounting hardware.
